How to Reset an Epson L3110 Printer That Is Blinking

 

How to Reset an Epson L3110 Printer That's Blinking Using the Epson Resetter Download Application

The Epson L3110 is one of the most popular all-in-one printers in the EcoTank series, well-known for its cost efficiency, compact design, and reliable performance for both home and office use. However, like many inkjet printers, the L3110 sometimes faces issues where it suddenly stops working and starts blinking. This blinking error usually indicates that the printer requires a reset due to the waste ink pad counter being full or other system errors.

In this guide, we will explain in detail how to reset an Epson L3110 printer that is blinking by using the Epson Resetter download application. By following the steps carefully, you can restore your printer to normal functionality without having to take it to a service center.

 

Understanding the Blinking Issue on Epson L3110

Before jumping into the reset process, it’s important to understand why your Epson L3110 printer starts blinking. Here are some of the most common causes:

1. Waste Ink Pad Counter Reached Its Limit
   The printer has an internal memory that keeps track of the number of printed pages and the amount of ink absorbed by the waste ink pad. When it reaches the maximum threshold, the printer will stop printing and start blinking as a preventive measure.
2. Paper Jam or Mechanical Issues
   Sometimes, the blinking lights indicate that paper is stuck inside the printer or that a mechanical error has occurred.
3. Improper Cartridge Installation
   If the ink tanks or cartridges are not installed properly, the printer may also blink as a warning sign.
4. Firmware or Software Errors
   Occasionally, errors in the system software can trigger the blinking issue.

If your printer is blinking due to a full waste ink pad counter, you will need to reset it using the Epson Resetter application.

 

What is the Epson Resetter Download Application?

The Epson Resetter is a small utility tool designed specifically to reset Epson EcoTank printers like the L3110. It clears the waste ink pad counter, allowing the printer to function normally again. This application is also referred to as the Adjustment Program.

Key features of the Epson Resetter tool include:

• Resetting the waste ink pad counter.
• Restoring printer status from error to ready.
• Supporting multiple Epson EcoTank models.
• Simple, lightweight, and easy to use.

By using this tool, you don’t need to spend money at a service center every time your printer displays a blinking error.

 

Preparing Before Resetting Epson L3110

Before you begin the reset process, make sure you have the following:

1. A Computer or Laptop with Windows OS installed (the resetter tool is generally not available for macOS).
2. USB Cable to connect your Epson L3110 printer to the computer.
3. Epson Resetter Download Application (Adjustment Program for Epson L3110).
4. Stable Power Supply to avoid interruptions during the reset process.

 

Step-by-Step Guide to Reset Epson L3110 Printer

Follow these steps carefully to reset your Epson L3110 using the Resetter tool:

Step 1: Download the Epson Resetter Tool

• Search for “Epson L3110 Resetter Download” online and download the Adjustment Program specifically for your printer model.
• Extract the downloaded ZIP or RAR file into a folder on your computer.

Step 2: Connect the Printer

• Ensure your Epson L3110 printer is turned on and connected to your computer via a USB cable.
• If the printer is blinking, don’t worry; it will still be recognized by the resetter tool.

Step 3: Run the Resetter Application

• Open the folder where you extracted the resetter files.
• Look for the file named AdjProg.exe and run it as Administrator.
• A new window will appear showing the Adjustment Program interface.

Step 4: Select Your Printer Model

• Click on the Select button.
• Choose your printer model (Epson L3110) from the list.
• Ensure the correct port (USB) is selected. If you are unsure, choose Auto Select.
• Click OK to confirm.

Step 5: Enter Waste Ink Pad Reset Mode

• In the Adjustment Program window, click on Particular Adjustment Mode.
• From the list, choose Waste Ink Pad Counter.
• Click OK to proceed.

Step 6: Reset the Waste Ink Pad Counter

• In the Waste Ink Pad Counter menu, check the boxes next to Main Pad Counter and Platen Pad Counter.
• Click on the Check button first to view the current status.
• Then, click on the Initialize button to reset the counter.
• Wait a few moments while the tool communicates with your printer.

Step 7: Restart the Printer

• Once the reset process is complete, turn off your printer.
• Wait for a few seconds, then turn it back on.
• The blinking error should now be gone, and the printer will return to normal status.

 

Important Notes After Resetting

1. Clean or Replace Waste Ink Pads
   While the resetter tool clears the error, the waste ink pads inside your printer may actually be saturated with ink. If left unattended, this can lead to ink overflow. It’s recommended to either replace the waste ink pads or install an external waste ink tank.
2. Use Genuine Ink
   Always use genuine Epson ink to ensure the longevity of your printer. Non-genuine inks may damage the system and cause frequent errors.
3. Perform Regular Maintenance
• Run nozzle checks regularly.
• Clean the printhead when necessary.
• Avoid leaving the printer unused for long periods to prevent clogging.

 

Advantages of Using the Epson Resetter

• Cost-Effective: Saves money compared to bringing your printer to a service center.
• Quick Solution: The entire reset process usually takes less than 10 minutes.
• User-Friendly: Simple steps that even beginners can follow.
• Extends Printer Lifespan: By clearing errors and performing resets, you can keep your printer functional for years.

 

Common Questions (FAQ)

1. Why does my Epson L3110 keep blinking even after resetting?
This may happen if the waste ink pads are physically full and need replacement. Resetting alone won’t solve the problem permanently.

2. Is using the resetter tool safe for my printer?
Yes, as long as you use the correct version of the tool for your printer model. However, always download from trusted sources to avoid malware.

3. Can I use the same resetter tool for other Epson printers?
Some versions of the Epson Resetter tool support multiple models, but it’s always best to download the tool that matches your printer series.

Resetting an Epson L3110 printer that’s blinking is a straightforward process when you use the Epson Resetter download application. By following the steps outlined in this guide—downloading the tool, connecting your printer, and initializing the waste ink pad counter—you can quickly resolve the blinking error and get your printer back to work.

Remember, while resetting clears the error, maintaining your printer is equally important. Regular cleaning, using genuine ink, and replacing waste ink pads when necessary will ensure that your Epson L3110 continues to deliver high-quality prints for a long time.

With this method, you don’t need to rely on expensive repair services. Instead, you can handle the issue yourself in just a few minutes, saving both time and money.

 

Subscribe to receive free email updates: